Superlative Arms .750" Adjustable Piston System - Set Screw, Melonited - Rifle Length

Superlative Arms .750" - Rifle Length Adjustable Piston System - Set Screw, Melonited

• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas and pressure are bled out of the block allowing the system to run much cleaner and cooler.

• Reduction of wear on the bolt carrier group components and upper receiver.

• Reduction of felt recoil allowing for faster follow-up shots.

• Patented adjustment detent is located outside of the block and therefore no contamination.

• In Bleed Off Mode the gas adjustment screw does not restrict the gas flow; therefore, there is no erosion or seizing of the screw, and no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR’s and/or suppressors the Bleed Off port allows the excessive pressure to be exhausted out of the block reducing blow back.

NOTE: The Superlative Arms Piston Kit does not come with a Bolt Assembly (bolt, cam pin, firing pin, or firing pin retainer). Bolt Assembly sold separately.
Gas System/Op Rod Length: Rifle
Op Rod Weight: 1.5 oz.

Piston Gas Block Attachment Type: Solid, Set Screw
Barrel Diameter: 0.750”
Piston Block Material: 416 SS
Piston Block Finish: Melonite, QPQ
Weight: 2.5 oz.
Attachment Length: 1”

Carrier: One-piece carrier with anti-tilt skis and dimpled key for perfect op rod strike
Carrier Material: 8620 Steel
Carrier Finish: DLC (Diamond-like Carbon) coating
Carrier Weight: 9.6 oz.

Gas Adjustment: (Patented) 30 locked positions, front of block
Bleed Off Port: (Patented) Front of block which vents forward away from operator

Total Kit Weight (Packaged): 1 lb. 5.9 oz.

• (1) Piston System Gas Block Assembly
• (2) 10-32 x 1/4" Set Screws
• (1) Piston System Carrier (Not included: bolt, cam pin, firing pin, and firing pin retainer)
• (1) Piston System Op Rod
• (1) Spring for Op Rod (Optional, not required - use at your discretion)
• (1) Receiver Bushing and installation tool (Optional, not required - use at your discretion)
• (1) 3/32" x 6" L-Shaped Hex Key, Ball-end Allen / Torx T-15 Tool
• (1) 9/64" x 6" Hex Key (tool to install/remove gas block op rod plug)
• (1) Instructions for installation and setup
• (1) Superlative Arms sticker