Rifle Build Kit - 5.56 | Builder's Grade Complete 16" Upper Receiver with A2 | Mission First 6-Position Minimalist Stock and Buffer Tube Kit | Bare Necessities Lower Parts Kit
Builder's Grade Complete 16" 5.56 Upper Receiver | A2 | 15" Quad M-LOK | BCG & CH:
The Complete 16 inch M-LOK upper receiver comes with a 15 inch quad free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.
|
Barrel
|
Specifications
|
|---|---|
| Caliber | 5.56 |
| Length | 16" |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Government |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | MidLength |
| Gas Block Journal | .750" |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2x28 TPI |
| Weight | 27.2oz |
| Barrel Extension | M4 Feed Ramps |
| Target Crown | 11 Degree |
Bolt Carrier Group:
- Enhanced 9310 Steel (Bolt)
- 8620 Tool Steel (Carrier)
- Bolt is shot Peened and MPI
- All BCG components are pre-polished before being processed and then post polished for an incredible shine
Upper Receiver:
- Machined from a Mil-Spec 7075 T6 forging Hard Coat Anodized per Mil-A-8625F, Type III
- M4 Feed ramps
- Made in the U.S.A.
Handguard:
- 15" free float handguard
- MIL-STD 1913 Picatinny rail on top
- 4 M-Lok slots on 4 sides
- Precision Machined aircraft grade aluminum, for high strength and weight savings
- Clamp on system for easy assembly
- Steel Barrel nut to resist movement under heat
- Made in USA
Charging Handle:
- Alloy Charging Handle Assembly
- Complete with Standard Latch
- Made from hardcoat anodized aluminum
- Black finish
Mission First BMSMIL Battlelink Minimalist Stock:
Designed to be the lighted stock on the market, the BMSMIL Battlelink from Mission First went through extensive input from operators to find the best balance of functionality and lightweight materials. Manufactured using a special, military grade, reinforced polyamide, the BMSMIL Battlelink adapts to operational needs by utilizing custom accessory mounts and new sling configurations but weighs under 6 ounces. The stock is designed for mil-spec 1.148 diameter extensions and is proudly made in the United States. If you have questions or concerns, be sure to contact us!
- Slide-on replacement for original collapsible butt stock
- Angled non-slip rubberized buttpad for faster presentation
- Quick detach sling mounting point positioned perfectly for ambi shooters
- Upper section includes enhanced cheek weld
Bare Necessities Complete AR15 LPK:
This BN Lower Parts Kit is what you need to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
- Safety Selector
- Selector Spring
- Selector Detent
- Magazine Catch
- Magazine Catch Spring
- Aluminum Magazine Catch Button
- Bolt Catch
- Bolt Catch Detent
- Bolt Catch Spring
- Bolt Catch Roll Pin
- Take Down Pin Take Down Detent
- Take Down Detent Spring
- Front Pivot Pin
- Front Pivot Pin Detent
- Front Pivot Pin Detent Spring
- Trigger Guard
- Trigger Guard Roll Pin
- Buffer Retainer Detent
- Buffer Retainer Spring
- A2 Pistol Grip
- Pistol Grip Screw
- Pistol Grip Lock Washer
- Trigger
- Trigger Spring
- Hammer
- Hammer Spring
- Disconnector
- Disconnector Spring
- Hammer Pin & Trigger Pin
***Disclaimer: This made-to-order product may include minor component substitutions of military-specification quality or better. These changes, potentially differing cosmetically from shown images, ensure enhanced quality and performance. This may include ambidextrous sling loop endplates or an upgraded extra power spring.
Please Note:Uppers may present light fouling from our quality control process and/or test firing
