Pistol Build Kit - 5.56 | Builder's Grade Complete 10.5" Upper Receiver with A2 | SB Tactical Pistol Brace | Bare Necessities Lower Parts Kit
BG Complete 10.5" 5.56 Upper Receiver | A2 | 9" M-LOK | With BCG & CH:
This Complete 10.5 inch M-LOK upper receiver comes with a 9 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.
|
Barrel
|
Specifications
|
|---|---|
| Caliber | 5.56 |
| Length | 10.5" |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Government |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | Carbine |
| Gas Block Journal | .750" |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2x28 TPI |
| Weight | 18.4oz |
| Barrel Extension | M4 Feed Ramps |
| Target Crown | 11 Degree |
Bolt Carrier Group:
- Enhanced 9310 Steel (Bolt)
- 8620 Tool Steel (Carrier)
- Bolt is shot Peened and MPI
- All BCG components are pre-polished before being processed and then post polished for an incredible shine
Upper Receiver:
- Machined from a Mil-Spec 7075 T6 forging Hard Coat Anodized per Mil-A-8625F, Type III
- M4 Feed ramps
- Made in the U.S.A.
Handguard:
- 9" free float handguard
- MIL-STD 1913 Picatinny rail on top
- 3 M-Lok slots on 3 sides
- Precision Machined aircraft grade aluminum, for high strength and weight savings
- Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
- Clamp on system for easy assembly
- Steel Barrel nut to resist movement under heat
- 10 oz with barrel nut and hardware
- 1.35" Inside Diameter
- 1.63" Wide
- Made in USA
Charging Handle:
- Alloy Charging Handle Assembly
- Complete with Standard Latch
- Made from hardcoat anodized aluminum
- Black finish
SB Tactical Pistol Brace - SBA3, SBA4, or SBA5 Pistol Brace + Tactical Sport Mil-Spec Buffer Tube Kit:
- SB Tactical Adjustable Pistol Stabilizing Brace
- Complete Tactical Sport Buffer Tube Assembly Kit
- Carbine buffer (3 oz)
- Carbine buffer spring
- Carbine stock end plate
- Carbine stock lock ring-castle nut
Bare Necessities Complete AR15 LPK:
This BN Lower Parts Kit is what you need to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
- Safety Selector
- Selector Spring
- Selector Detent
- Magazine Catch
- Magazine Catch Spring
- Aluminum Magazine Catch Button
- Bolt Catch
- Bolt Catch Detent
- Bolt Catch Spring
- Bolt Catch Roll Pin
- Take Down Pin Take Down Detent
- Take Down Detent Spring
- Front Pivot Pin
- Front Pivot Pin Detent
- Front Pivot Pin Detent Spring
- Trigger Guard
- Trigger Guard Roll Pin
- Buffer Retainer Detent
- Buffer Retainer Spring
- A2 Pistol Grip
- Pistol Grip Screw
- Pistol Grip Lock Washer
- Trigger
- Trigger Spring
- Hammer
- Hammer Spring
- Disconnector
- Disconnector Spring
- Hammer Pin & Trigger Pin
***Disclaimer: This made-to-order product may include minor component substitutions of military-specification quality or better. These changes, potentially differing cosmetically from shown images, ensure enhanced quality and performance. This may include ambidextrous sling loop endplates or an upgraded extra power spring.
Please Note: Uppers may present light fouling from our quality control process and/or test firing
***Please allow an additional 2-3 business days of lead time as these uppers are made to order.***
