Builder's Grade Complete 16" 7.62 x 39 Upper Receiver - Black | A2 | 12" M-LOK | With Bolt Carrier Group and Charging Handle
This Complete 16 inch M-LOK upper receiver comes with a 12 inch free float handguard and is built with only the best Mil-Spec components. The heart of this upper is comprised of a 4150 barrel and our black nitride bolt carrier group that is finished with an incredible polish, making the action smooth and easy to keep clean.
Barrel
|
Specifications
|
---|---|
Caliber | 7.62x39 |
Length | 16" |
Material | 4150 Chrome Moly Vanadium |
Profile | Medium |
Finish | QPQ Corrosion Resistant |
Gas System Length | Carbine |
Gas Block Journal | .750" |
Dimpled? | Yes |
Twist Rate | 1:10 |
Muzzle Thread | 5/8x24 TPI |
Weight | 31.2oz |
Barrel Extension | Widened M4 Feed Ramps |
Target Crown | 11 Degree |
Bolt Carrier Group:
This Black Nitride 7.62x39 Complete BCG is ready to be dropped into your 7.62x39 AR build. A common issue with standard firing pins is that they do not protrude far enough to reliably ignite 7.62x39 primers. This Premier 7.62x39 BCG features a bolt assembly with a shortened bolt tail, allowing the standard firing pin to protrude farther than it would with a standard bolt, thus eliminating this issue. There's no need for heavier hammer springs to ensure reliable ignition.
- M16-cut carrier
- Machined from 8620 tool steel (carrier) and 9310 steel (bolt)
- Carrier has forward assist serrations
- Salt bath black nitride finish – advanced lower friction coating that minimizes the need for lubricants and cleaning
- Properly staked gas key
- Machined & heat treated to USGI Specifications
- Internally QC checked and tested to ensure reliability
Upper Receiver:
- Machined from a Mil-Spec 7075 T6 forging Hard Coat Anodized per Mil-A-8625F, Type III
- M4 Feed ramps
- Made in the U.S.A.
Handguard:
- 12" free float handguard
- MIL-STD 1913 Picatinny rail on top
- 3 M-Lok slots on 3 sides
- Precision Machined aircraft grade aluminum, for high strength and weight savings
- Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
- Clamp on system for easy assembly
- Steel Barrel nut to resist movement under heat
- 11.7 oz with barrel nut and hardware
- 1.35" Inside Diameter
- 1.63" Wide
- Made in USA
Charging Handle:
- Alloy Charging Handle Assembly
- Complete with Standard Latch
- Made from hardcoat anodized aluminum
- Black finish
Please Note: Uppers may present light fouling from our quality control process and/or test firing
***Please allow an additional 2-3 business days of lead time as these uppers are made to order.***