Quantity in Stock: Ballistic Advantage 12.3" 5.56 Hanson Carbine Barrel w/ Lo Pro, Performance Series + Complete 5.56 BCG Combo
Barrel Info:
This 5.56 chambered 12.3 inch Performance Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. Our Performance Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension. Comes with a pinned low pro gas block.
| Barrel | Specifications |
|---|---|
| Caliber | 5.56 |
| Length | 12.3" |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Hanson |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | Carbine |
| Gas Block Journal | 1.03" Gas Block Seat for .750" Low Profile Gas Blocks Only |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2x28 TPI |
| Weight | 22oz |
"BA Hanson Series Barrels provide a lightweight feel without lightweight limitations. Every barrel in the BA Hanson Series was designed specifically to its length and caliber to yield the best results with every aspect taken into consideration. It is truly ideal for how the AR was meant to perform. With the BA Hanson Profile, we found a more efficient way to harness a bullets energy while limiting felt recoil considerably. The balanced feel and overall performance of a Hanson barrel will create a more organic relationship between you and your rifle. It will simply be an extension of you!" - Clint Hanson
BCG Info:
Our Nitrided M16 BCG is micro polished before and after the Melonite process, producing a beautiful finish and an extremely slick surface. The carrier is made from 8620 steel. The bolt is made from 9310 steel and is MPI Tested and engraved. The 223 Bolt and Bolt Carrier Assembly is compatible with 5.56 and 300 Blackout.
- Enhanced 9310 Steel (Bolt)
- 8620 Tool Steel (Carrier)
- Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring
- Tool Steel Extractor
- Shrouded Firing Pin
- Mil-Spec Gas Key (4130 Steel) attached with Grade 8 hardware and Properly staked
- Caliber: .223 / 5.56 / 300 Blackout
- Bolt is shot Peened and MPI
- All BCG components pre polished before being processed and then post polished for an incredible shine
Depending on your state and local laws, you could use this barrel with a lower receiver that is a Registered SBR, or Pistol. Possession of this barrel along with a Non-NFA lower receiver may be Prohibited. We are not lawyers and the above information is not legal advise. Make sure you understand the most up to date federal, state and local laws before proceeding with this product.
